Well-designed Ignition Shut Off Device - fuel level sender ultrasonic fuel level sensor – Dragon Bridge Detail:
User Manual of Fuel Sensor Device
Product Picture
Fuel consumption detector (YW1159)
Installation
1、Wiring Diagram
2、How to connect
3、Please check before instillation
1） Check whether the car original oil detector system working normal or not; when ACC is ON, car original oil detector system working well and the oil meter fix on the current oil level. Please note down the current oil level value.
2） Check the fuel gauge float is variable resistance fuel level sensor; Disconnect the car power, using the resistance profile of multi-meter to check whether the fuel float has the normal resistance( normally, it 5~500 Ω),few car use Voltage type oil float which are not suitable for this product.
4、Steps
1) Take apart of dash board carefully and find out the oil meter signal line.
2) Oil meter signal line voltage；Using the voltage profile of multi-meter measuring signal line for power supply voltage(1~5V)
- Oil meter signal line is connect to the fuel float signal line; Disconnect the power, connect the fuel float signal line with one side of the multi-meter conduction and oil meter signal line connect to another side of multi-meter, if connected, than that must be the oil tank signal line.
- Cut off Oil meter signal line, oil meter needle will come up to the top or bottom suddenly. If not, please find again for the right oil meter signal line.
Product detail pictures:
Related Product Guide:
New tracking technology could make lost belongings a thing of the past | Fleet Management System Features
Whistle 3 Pet Tracker Review: Basic but Good | Fleet Management System Features
We emphasize progress and introduce new merchandise into the market each and every year for Well-designed Ignition Shut Off Device - fuel level sender ultrasonic fuel level sensor – Dragon Bridge, The product will supply to all over the world, such as: Denver , Egypt , Southampton , If you need to have any of our merchandise, or have other items to be produced, make sure you send us your inquiries, samples or in depth drawings. Meanwhile, aiming to develop into an international enterprise group, we look forward to receiving offers for joint ventures and other cooperative projects.
By Teresa
from Angola
- 2015.09.23 18:44
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
By Rosalind
from Victoria
- 2016.09.16 13:44
