GPS Vehicle Tracker
(GPS+GSM+SMS/GPRS)
G-MT004
Introduction:
MT004 is a covert GPS tracker that easily installs to a car’s power source. this powerful hidden car tracker puts you in total control of individual vehicles or fleets – and drivers will never know it’s there unless you tell them. Perfect for tracking fleet vehicles, this best-in-class GPS device features improved accuracy, and it’s designed specifically to make locating and routing vehicles as simple as possible. It has built-in vibration sensor for intelligent vehicle anti-theft。
Functions
l GSM 850/900/1800/1900MHz
l Voltage: 12-60V DC
l GPS location, GPRS timing report
l Inquires the position by SMS or mobilephone or PC
l Built-in vibration sensor, vehicle anti-theft(Optional)
l ACC ignition signal detection, vehicle state hint(Optional)
l Can remote control vehicle cut-off oil or electric(Optional)
l One SOS key(Optional)
l Remote monitorin;(Optional)
l Power cut-off alarm(Optional)
Specification
l GSM: 850/900/1800/1900MHz
l GPRS: Class 12, TCP/IP
l Voltage: 8-75V DC
l Current:≈22mA(12vDC)
l ≈12mA(24vDC)
l GPS fixed time: Cold start 30sec(open sky)
l Warm start 29sec(open sky)
l Hot start 5sec (open sky)
l GPS fixed precision: 10m (2D RM)
l Temperature: -20℃ ~ +70℃
l Humidity: 5% ~ 95% RH
l Dimension: 90.0(L)x45.0(W) x13.5(H)mm
l Weight: 80g
LED scintillation state meaning interpretation:
LED |
Scintillation state |
Meaning |
Red Power LED |
Shine 0.1 sec, dim 4 sec |
Working |
Shine 1 sec, dim 2 sec |
Low power |
|
Always dim |
Power off or fault |
|
Blue GPS LED |
Shine 0.1 sec, dim 4 sec |
GPS Fixed |
Shine 1 sec, dim 2 sec |
GPS not Fixed |
|
Always dim |
Power off or fault |
|
Yellow GSM LED |
Shine 0.1 sec, dim 4 sec |
GSM ready |
Shine 1 sec, dim 2 sec |
GSM not ready |
|
Always dim |
Power off or fault |
Optional features
Monitor
When setting dial phone numbers listener terminal, the terminal will automatically hook into the listening state, then the caller can listen for the sound of the vehicle interior environment.
Setting the Monitor Number SMS command: monitor,13512345678#
Example: monitor,13512345678#
Terminal Re: Monitor number setting success!
Non-specific number calls, the terminal will not enter the listening state.
Note: Terminal SlM card must call display feature.
SOS numbers add
SOS numbers can be set up via phone to send the following text message center number to add the SOS number: sos, no1,00000000000, no2,00000000000, no3,00000000000#
For example: sos,no1,13412345678, no2,13512345678, no3,13612345678# if only to set an SOS number, you can specify the number corresponding to the SOS number, for example:
sos,no1,13412345678,# represents the first telephone set
sos,no2,13512345678,# represents a second call set up
sos,no3,13612345678,# represents the third telephone set
If the SOS number is set successfully, the terminal then replies “SOS numbers set successfully!” Message.
Remove SOS number
If you need to delete a specific number, you can first send a query parameter setting command to the terminal to get a specific number corresponding to the serial number, delete a specific number and then send text messages to the terminal command to delete the specified specific number.
sos,no1,d,no2,d,no3,d#
If you delete the SOS number successful, the terminal will return “SOS numbers deleted successfully!” Message.
Application:Widely used in vehicles, it is your tracking and monitoring assistant.