tracker device locator Long Standby GPS Tracker LTS-3YD

LTS-3YD

1.Application method

1. Before use, please test equipment model is correct, accessories are complete.

2. In shutdown state insert support GSM network SIM card (GSM 850,900,1800,1900MHZ)and open the caller id function and monthly flow (not less than 30 m/month traffic package).

3.Power on: press on the power button for 3 seconds or more then powered on.

4. Shutdown: When mobile phone APP display equipment online, through the app setting remote shutdown function to turn it off.

When mobile phone APP display equipment offline, please take out the Sim card and long press power button for power off.

5.Charge: insert the USB charging line, connected to the output of 5v – 1a standard mobile phone adapter, from no power to full about 8 hours.

2.Product function（‘*’for matching function）

1. Real-time tracking

2. Historical route

3. Geo-fence

4. Voice monitoring

5.* Demolition alarm

6. Vibration alarm

7. Displacement alarm

8.Various work modes: rapid positioning, standard positioning and save electricity positioning.

9. Multi-platform monitoring: support android, apple mobile phone system, computer network clients, etc

10.Universal: four frequency support GSM network, languages and time zone setting

3.Equipment parameters

Positioning: GPS satellite positioning + AGPS auxiliary positioning + LBS base station positioning

Positioning accuracy:    GPS—–5 to 15m         base station location—–100-1000m

Device size：96X60X22.6mm

Battery capacity：5000mAh   Longest standby time：90 days  charging time：8 hours

4.Function declaration

4.1  Working mode setting

 There are three kinds of working mode. User through setting in the phone APP software function to set the working mode.

1, rapid positioning (1 minute) : equipment at 1 minute intervals update location information, rapid positioning model the locator use battery faster.

2,standard positioning (10 minutes) : equipment according to the time of 10 minutes interval update location information.

3,save electricity positioning (an hour): equipment in one hour time interval update location information, the power-saving mode use battery is slowly.

4.2 Historical route query

This product can keep 3 months of route information. If two anchor point position is very close, this product will be in the route filter position very close point.

4.3 Geo-fence

Users in the cell phone APP choose Geo-fence function, on the map can set Geo-fence round, if the device away from fences, mobile phone APP client-side will display the alarm information. Alarm information time is related to the positioning interval time setting, The smaller positioning time interval can get timely alarm information.

4.4 Voice monitoring

Select voice monitoring function in setting up and fill in your mobile phone number, wait for a while and after confirmation equipment will be sent a calling to your number, you can listen to the voice around locator after answering. Set up after the white list, the inside of white list number will send a calling to device, device will automatic answer, can listen to the voice around locator.

4.5 Demolition alarm

Device with the demolition sensor on the back. If induction sensor obscured for more than 3 minutes, when people take it and let the device induction sensor not obscured , device will send demolition alarm message.

4.6  Vibration alarm

Device with vibration sensor, when vibration alarm switch turn on, vibration equipment detected for more than 5 seconds, vibration alarm information will be issued by device.

4.7  Displacement alarm

In the case of GPS positioning, when displacement alarm switch turn on, equipment detect displacement of more than 200 meters, device will send displacement alarm information itself.

4.8  SMS monitor number and language time zone setting

After Set message monitoring number, SMS monitoring number can give device issued message commands (specific message instructions please contact retailers). SMS alarm monitoring number can receive device sent text messages and other notification message. Time zone is set up for foreign language users design features, user does not need to set up in China.

5.Key description

When shutdown state with enough power press power key locator will starting up. Locator online can not shut down manually, under the condition of locator offline can press power key to turn it off manually.

6.Light effect show

Starting up： Indicator light for 3 seconds.

Charging： In charging process indicator light flashing，after full indicator long time turn on.

Keys:  When starting up press the power button indicator for 2 seconds

7.Software client-side

7.1  Scan the QR code download software APP “Yi Tracker” to cell phone client-side.

7.2  For PC: https://en.gps18.com/    

7.3 For Android,

You can download the app from ”google play” by searching “Yi Tracker”

For Iphone,

You can download the app from ”app store” by searching “Yi Tracker”

Note: the installation process prompts whether to trust this program, or whether to allow access to mobile phone location, please choose trust or allow.

7.3  Open APP client-side, choose license plate number login in，platform website please enter into：https://en.gps18.com/，license plate number please type device ID number on box(ten number)， default passwords as 123456, Finally click login to the main menu. (advice for the first time after landing please amend and remember the passwords)