Original Factory Car Camera And Recorder - vehicle tracking device OBD GPS Tracker OBD-DB05A – Dragon Bridge

Traffic network examination instrument

Bluetooth Android sound card version OBD-DB05A

Manual agreement

The conventions in the manual regarding icons are as follows：

Obtaining technical support

Please get the user to the https://www.wiselink.net.cn user manual of the latest information, a user manual modification or upgrade we will through the website update, please note that other users can understand the latest products through the website in a timely manner.

Installation and use of hardware products

chapter 1. product overview

1.1Product Brief

Dragon bridge remote auto examination system hardware terminal OBD-DB05Ais a portable embedded devices, connected with the OBD interface of the car, the real-time data acquisition vehicle fault information, the speed of flow.

OBD-DB05Acommunicates with the owner’s mobile phone through the built-in Bluetooth module and completes the complex functions of the dedicated client WSM, which is installed in the mobile phone.

1.2Working principle

Chapter 2.Specification parameter

2.1 Appearance and interface

① OBD interface: connect with the vehicle OBD interface.

② Status indicator light: when the OBD is switched on, the indicator light is lit.

③ Voice prompt: voice prompt location during OBD-DB05Aterminal operation.

2.2 technical parameter

technical parameter：

working voltage：DC10V-26V

Maximum current：＜120mA

Maximum power dissipation：＜3W

size：48×26×41mm

working temperature：－20℃～70℃

Operating humidity：10%～90%

Chapter 3.Main functions of hardware

Know the car’s fault code, and the fault code, fault analysis and other information on the owner’s mobile phone software WSM display.

Chapter 4.Switch machine

OBD-DB05Adirectly from the vehicle’s OBD power, in the car automatically boot; automatically switch off after flameout.

Chapter 5.Hardware installation and use

The remote vehicle inspection system hardware terminal OBD-DB05Aneeds to be installed on the OBD connector of the vehicle. Different types of OBD joint position will vary, but the installation process is the same.

The hardware installation process is as follows：

Step 1: find the OBD connector for the vehicle. As shown (this diagram is for reference only):

The second step: to connect the OBD-DB05Ainterface of OBD to the OBD connector of the original car.

The third step: the car, at this time, Tmt0N- Y05A11S status indicator light. 

The fourth step: open the WSM client on the phone for testing. Installation and use of WSM client.

The value of Remote Auto health examination system service to car owners

Three major functions：

1.Man car safety
2.Intelligent copilot system
3.Premium discount.