Our enterprise since its inception, often regards solution excellent as enterprise life, continually strengthen output technology, enhance product high quality and continually strengthen organization total high-quality administration, in strict accordance using the national standard ISO 9001:2000 for OEM Supply China Vehicle 4G GPS Tracker for Car Tracking Device with cut power alarm, We have now confident that we can easily offer the premium quality products and solutions at resonable price, good after-sales services into the buyers. And we’re going to produce a dazzling future.
Our enterprise since its inception, often regards solution excellent as enterprise life, continually strengthen output technology, enhance product high quality and continually strengthen organization total high-quality administration, in strict accordance using the national standard ISO 9001:2000 for 4G Tracker, China GPS Tracker, The company has perfect management system and after-sales service system. We devote ourselves to building a pioneer in the filter industry. Our factory is willing to cooperate with different customers domestic and overseas to gain better and better future.
Characteristic parameter
|
Property |
description |
|
Content |
Specifications |
|
Terminal size |
76.6mm*27.1mm*15 |
|
weight |
75g |
|
network |
GSM/GPRS |
|
Network frequency band |
850/900/1800/1900Mhz |
|
GPS module |
UBLOX |
|
GPS sensitivity |
-159dBm |
|
GPS position accuracy |
10m |
|
First positioning time |
Cold start 35-80s Warm start 35s Hot start 1s |
|
working voltage |
9－100V
|
|
Storage temperature |
-40°C to +85°C |
|
working temperature |
-20°C to +55°C |
|
humidity |
5%–95% Non freezing |
Function
|
function |
Function breakdown |
description |
|
Location data report |
Location tracking |
The positioning information such as latitude and longitude is returned according to the set interval time. |
|
Vehicle status detection |
Ignition/extinguish state |
The ACC switch status is included in each uploaded packet. |
|
Vehicle power failure reminder |
Turn on the backup battery. When the host detects that the vehicle voltage is less than 5V, it will report the power failure reminder. |
|
|
Low pressure alarm |
When the host detects the vehicle voltage 5-10V, it reports a low-voltage alarm reminder. |
|
|
Over Speed alarm |
The platform sets the maximum speed limit value. When the GPS speed is greater than the set value, the overspeed alarm is reported. |
|
|
Oil line detection |
Support platform and SMS to cut off oil and gas, oil and gas function |
|
|
Illegal removal of the alarm |
When the terminal generates a power failure alarm or triggers the light status, if both conditions are generated within 2 minutes, the illegal removal alarm is reported. |
|
|
Other Functions |
Blind zone re-transmission function |
The terminal is located and not online, and the data is stored up to 300. Upload when the signal is online normally |
|
EPO assisted positioning function |
The terminal supports the EPO assisted positioning function to enhance the positioning effect. |
|
|
Inflection point |
When the device orientation angle changes more than a certain angle, immediately upload a position data to optimize the trajectory. |
|
|
Remote upgrade |
Upgrade the housekeeper remote upgrade. |
|
|
Low power consumption |
Sleep mode |
G-sensor senses the vibration state of the vehicle in real time, and the power is in the sport mode. When the host has no vibration for 5 minutes, it enters the static mode, and the GPS module is turned off, and the vibration enters the sport mode. |
Interface Definition
|
Property |
color |
description |
|
1 |
Yellow |
Oil road negative |
|
2 |
Orange |
ACC |
|
3 |
Black |
battery negative |
|
4 |
Red |
battery positive |
1. Relay white wire connected to the battery positive
2. Relay yellow wire is connected to the position yellow line
3. The two green wires of the relay are respectively connected to the oil pump line (the oil pump line needs to be disconnected). The direct the red line without the relay is connected to the positive pole of the battery, and the negative line of the black line can be used.
Matters needing attention in equipment wiring
a. power supply, ACC, oil and electricity control line (4Pin)
b. the equipment standard power supply for 12V-100VDC power line, please use the original offer, the red line for the positive power supply, black for the cathode of the power supply; please choose the cathode of the power supply grounding alone or ground installation, not with other ground together;
c. equipment orange line to the ACC line, be sure to pick the ACC vehicle terminal will switch, according to the ACC state to determine whether to enter the fortification; if no ACC line will allow vehicles to enter the default fortification state, vehicle vibration occurs, will trigger a vibration alarm. If the anti-theft function is not needed, the ACC line can be directly connected with the positive pole of the power supply.
d. break the oil and electricity control line (yellow line) to connect the yellow line on the relay.
