OEM Factory for Fleet Management Cyprus - tracking site OBD GPS Tracker 06DX – Dragon Bridge

06DX –Traffic network examination instrument

Performance and function description

Working voltage: DC6V~20V

Working current: <55mA@13.7V

Maximum current: <120mA @13.7V

Standby current: 5mA@12.2V

Maximum power consumption: <2W

Start mode: engine ignition

Size: 62*49*27mm

Working temperature: -20 ° C ~ 85 ° C

Working humidity: 10% to 90%

GPRS module parameters:

1. Quad frequency: 850/900/1800/1900 MHz

2, GPRS multi-time slot: Class 12

3. GPRS mobile station: Class B

4. Compatible with GSM Phase 2/2+: Class 4 (2W @ 850/900MHz) Class 1 (1W @ 1800/1900MHz)

5. Rate: GPRS Class 10 85.6 kbps (downstream) 42.8 kbps (upstream)

6. support PBCCH

7. coding scheme: CS 1, 2, 3, 4

8. USSD

9. the protocol stack: TCP / UDP / PPP / HTTP * / SMTP *

10,.current consumption: 1.3mA @ DRX=5 1.1mA @ DRX=9 (TBD)

11. SIM application kit

12.AT command control: GSM 07.07, 07.05 and other AT extension instructions

13. support for Bluetooth

The main parameters of the acceleration sensor:

Measuring acceleration range: ±4g

Measurement accuracy: 8.192mg

Support collision, rapid acceleration, rapid deceleration, sharp turn monitoring

GPS module main parameters:

Receiver type: GPS1612

GPS and QZSS L1 C/A, 1

Hardware support Galileo E1B/C, Compass

SBAS: WAAS, EGNOS, MSAS Accuracy: 2D plane: GPS 10 m average

Drift: <0.02m/s

2D plane: 5m average with WAAS assistance

Timing accuracy: 1us capture: cold start <42 s

Warm start <36s

Hot start <1s

Recapture <0.1s

Navigation IP function: Combine the server to implement the navigation IP function. The device is connected to the navigation IP, and the application IP is assigned by the navigation IP. The device then switches to the application IP to connect and perform data interaction. The application IP is applied for 24 hours. This ensures that our distributed deployment is effectively managed and can alleviate the stress of a single server.

Dual-mode communication function: Supports dual-mode communication between GSM and Bluetooth, prefers GSM communication, and uses Bluetooth to communicate when there is a Bluetooth connection Y06 device. This will ensure that the device can be used in the same situation as the SIM card arrears and network status problems.

The real-time reading function of the vehicle status: Y06 supports the remote reading of 103 real-time data streams. When the expert agent needs to analyze the vehicle status, the server can select the data item to be read and send it to the terminal. The vehicle performs data reading with a data interval of 3S and continuous 10 minutes, and uploads the server to provide data support for the expert agent. In order to ensure the safety of the owner, the real-time reading function of the vehicle state requires the vehicle to be parked and read in the case of parking.

Fuel consumption reading function (in progress): support the fuel consumption reading of the vehicle and accumulate the fuel consumption of the vehicle for 100 kilometers 

Built-in GPS positioning function: Supports built-in GPS function, and optimizes GPS anti-jamming and antenna, and realizes fast positioning of built-in GPS. The terminal can upload the positioning information to the server through the set reporting interval, and the server performs various data operations according to the uploaded GPS message, such as a track, a location, an electronic fence, and the like. The GPS reporting interval can be set. The default is 30S uploading.

Low-voltage alarm function: When the vehicle battery power is lower than a certain set value, a low-voltage alarm will occur, indicating that the owner’s battery is low. The default value is now 11.5V. The usage scenario of the low-voltage alarm is the working state of the device and is detected each time a health message is sent.

Driving behavior analysis: The product has built-in acceleration sensor, which can detect the rapid acceleration, rapid deceleration, and sharp turn of the vehicle. When the vehicle has a bad driving behavior such as sudden increase, sudden decrease, sharp turn, etc., the device will generate a posture message. The actual driving behavior, time, and location information generated are reported to the server for analysis of the driving behavior of the owner.

SMS control SIM card number setting: remote control, remote car search function is to control the vehicle by sending text messages. Is it possible for all SIM cards to send text messages to control the vehicle? Of course not, if all mobile phones can control the vehicle, That is not safe for the owner. Only the APP registered mobile phone number and the mobile phone number added by the registered account (up to 5 numbers can be added) can control the vehicle. These numbers will be sent to the device through the network, and the device will store these. Number, only these stored numbers can control the vehicle.

Terminal SIM card number reporting logic: Since the SIM card is used to send text messages to remotely control the vehicle, who is the SMS message to, and what is the SIM card number of the terminal? This feature will not work unless we ask all customers to install a SIM card that has a SIM card number burned. In order to solve this problem, we have added the terminal SIM card number reporting logic, that is, if the SIM card number of the terminal is not written into the SIM card and cannot be read by the terminal, the terminal will send a short message to the center, and the center will receive the short message number through the network. The card is sent to the terminal, and the card number is recorded. After the terminal receives the card number, the card number is written into the SIM card, and the written card number is valid for a long time. Attention: If the customer installs the SIM card, it needs to send a text message function.

Vehicle status warning function: When the vehicle is turned off, the equipment will detect the door and window status and generate an alarm in different scenarios: First, if the vehicle supports detecting whether the door function is locked, the door is locked, and the door and window are unlocked. Second, if the vehicle supports detecting whether the door function is locked, the door is unlocked, the door state is detected cyclically until 15 minutes, the door and window are detected, the door and the window are unlocked, and an alarm is generated; third, the vehicle does not support When the door status is detected, the delay is 30 minutes. When the door and window are detected, the door and the window are unlocked, an alarm is generated;