OBD Plug-in GPS Vehicle Tracker
Our plug-in vehicle tracking device provides the easiest to install GPS tracking solution available. Simply plug the device into the OBD II port of most cars or trucks manufactured after 1996 (does not support electric vehicles), and you are ready to go.
- Installs in seconds. If you can plug in a lamp, you can install this device
- Provides instant, real-time GPS tracking
- Reports once a minute when vehicle is on, once an hour when off
Function:
1. Real time function
2. Communication management function
3. Alarm function
4. Location function
5. Driver behavior
6. Car CAN bus function
7. Remote management function
8. Bluetooth
9. Backup battery
10. External interface
Characteristic Parameters
| Attribute | Describe |
| Working Voltage |
9-36V DC |
| Average Corking Current |
<130mA@12V |
| Dormancy Working Current |
<10mA@12V |
|
Working Temperature |
-30℃～+70℃ |
|
Storage Temperature |
-40℃～+85℃ |
|
SIM Card |
Replaceable |
|
TF Card |
Can support |
|
GPS Antenna |
External |
|
GSM Antenna |
External |
|
Bluetooth Antenna |
External (matching) |
|
WIFI Antenna |
External (matching) |
|
Main Control Chip |
STM32F205VET6 |
OBD Module
| Attribute | Describe | ||||||||
|
Protocol Type |
|
