M220 is a plug & play 2G gps tracker that can install in cars & trucks, it reads data from car ECU, including mileage, fuel consumption, fuel level, DTC code, temperature, VIN & others. It also record driving behavior & send to server for analysis. It is widely used in fleet management & insurance telematics.
Functions:
Communication Management Function
GPS function
Reminder alarm function
Driving behavior
OBD data function
Remote control management function
OBD II and CANBUS protocol, DC 12V and 24V; |
Support type pressure monitoring (need accessories); |
2G GSM/GPRS 850/900/1800/1900MHz; |
Plug and play, small size, no installation cost; |
Collect fuel consumption, fuel level data; |
Very accurate mileage data (accuracy>99%); |
Collect DTC (Diagnostic Trouble Code) for remote diagnostic; |
Collect VIN, engine temperature; |
Support FMS CanbusJ1939 (read accurate fuel consumption data & diagnostic fault code); |
Internal GSM and GPS antennas; |
TCP and UDP; |
Update firmware over the air; |
Illegal start-up, impact and rollover alarm; |
Detect harsh acceleration, braking, turn and high revolution; |
Driving behavior recording and analysis; |
Store break points data in non-volatile memory; |
Track on Google map and other maps; |
Android, iOS APP & telematics software free for ever; |
Auto sleep mode to save automotive power; |
Wide working temperature range: -30 to +80℃. |
Technical Specifications
Property | description |
Working voltage | 9-36V DC |
Average operating current | <100mA@12V |
Sleeping current | <8mA@12V |
Working temperature | -30℃~+70℃ |
Storage temperature | -40℃~+85℃ |
SIM card | can be replaced |
GPS antenna | built-in |
GSM antenna | built-in |
Master chip | STM32F103RET6 |