High definition Cargo Track N Trace - small gps tracker for car Long Standby GPS Tracker LTS-100D – Dragon Bridge

      GPS TRACKER LTS-100D 

（GPS+AGPS+LBS+GSM+SMS/GPRS）

1. Brief introduction

GPS TRACKER LTS-100D （GPS+AGPS+LBS+GSM+SMS/GPRS）Have Combined GSM wireless communication technology and GPS global positioning system technology, Adopted industrial-grade fireproof material, Built-in 6 unit 18MM × 3MM strong magnetic, with a water proof IPX-5 design, backup 8000MAH high-capacity battery, can support a super long time standby up to 100 days, can remote tracking and control device by SMS and GPS tracking platform. Strong Magnetic with free installation design which is very easy for customers to use.

2. Application fields

● Car rentals / for small fleet management

● Outdoor Activities

● Personal Safety

● Personnel Management

● Tracking and positioning

● Animal Protection and grazing

3. Specifications

4. Accessories

● 1* 5V 1000MA Charger

● 1* User Manual

● 1* main device

5. User manual

5.1 Insert SIM Card and start the device

5.1.2 The device needs to insert a GSM SIM card, (GSM network Global generic)

5.1.3  When insert a SIM card, first open the waterproof plug, insert the SIM card chip downward into the slot according to the label, and then cover the waterproof plug.
Note:

(1)  Device will automatically turn on when insert the card correct

(2)  Please keep your SIM card open the GPRS function

(3)  Please refer to your mobile phone user manual to close in put the SIM PIN function if your SIM card ask you to in put the SIM PIN

(4)  Please keep your SIM card been charged when using together with our device

(5)  Please keep the device hidden installation to avoid thief damage

(6)  Please avoid putting our device together with some emission source, such as reversing radar, anti-theft devices and other car communications equipment;

(7)  The device are built-in backup GSM and GPS antenna, please keep the device installed with a positive upward (toward the sky), and make sure there is no metallic objects cover our device

5.1.4  Indicate lights

5.2  Charging   

Please use the original charger and battery to charge the device more than 12 hours at the first time

Remark:

(1) This device contains a batteries, please do not bump or stab it into the fire.

(2) Please keep the device charging in time to ensure the device can working properly.

5.3  Setting centre number 

5.3.1  Can only set one centre number, if you have set many number then the last one will be the centre number

5.3.2  Default centre number password: 123456

5.3.3  Setting commend list: admin123456 xxxxxxxxxxx    It will reply “admin ok”  if set Successful, remark: is the centre number you need set

5.3.4  Change the password of the center number commend list : password123456 xxxxx   It will reply “password ok”  if set Successful, remark: xxxxx is the new password you want to set

Remark: Our GPS TRACKER LTS-100D can set the parameters though SMS, you just need to use the centre number to send the commend list to the SMS number in the device, use comma as all the Separating symbol, and all the comma in the commend list need to be input in the English format

5.4  Get single position

5.4.1  It will reply a message including the latitude and longitude information to any number which called the device number if you did not set the center number, but if you have set the centre number then it won’t

5.4.2  It will reply a message including the latitude and longitude information to any number if you use SMS send the commend list to device number

Commend list: g1234

Remark:  The latitude and longitude information you got is the last address where it have gps signal if the place have not good gps signal where you send the commend list to get the newest position, if there have some deviation of the address please kind check the time information of the address  

5.6  Vibration Alarm

5.6.1 Open the SMS vibration alarm: 125# (default)  reply message: OK

5.6.2 Close the SMS vibration alarm: 126# (default)  reply message: OK

5.6.3 Open the calling vibration alarm: 122# (default)  reply message: OK

5.6.4 Close the calling vibration alarm: 121# (default)  reply message: OK

5.65 Setting the time length of vibration alarm, 1-15s:

Commend list:  vibtime123456,n   reply message: vibtime set ok

N(1-15s), 0 means cancel vibration alarm , default: 3S

5.7  Displacement Alarm

Setting displacement alarm commend list : move123456 300 (default) , per meter , reply message: move ok

Cancel displacement alarm commend list: nomove123456   reply message: nomove ok

5.8  Over speed Alarm

SMS over speed alarm for highest speed limit commend list : speed123456 080 means SMS over speed alarm for highest speed limit Is 80 Km/h

reply message: speed ok

5.8.1  Close the SMS over speed alarm: speed123456 000 (default)  reply message: speed ok

5.8.2  Open the SMS over speed alarm: speed123456 080 reply message: speed ok

5.9  Low power Alarm

The device will send an message: “ device is of low power, please keep the device charge “ to the centre number