Gps Container Tracking Intelligent Padlock Gsm E-seal Vehicle Lock Main functional characteristics of the product：
1 ,built-in GPS module or Beidou module,
2, support 2G or 3G (WCDMA) network
3, the use of RFID electronic tag, support RFID card unlock function
4, the use of high strength plastic mold, lock body is not easy to destroy, passive failure will provide an alarm signal, can be anti fall, shock, waterproof, dust-proof.
5, high capacity battery, up to 15000MHA, can be connected to work for up to 7 days
6, built-in strong magnetic, can make the lock firmly adsorbed on the car body
7, with low power alarm function, when the electricity is less than a certain value, the indicator light will start
8, with buzzer prompt function, when the lock is not normally locked, the terminal will automatically issue beep alarm to remind the driver
9, terminal with alarm reminders, when sewing is illegally cut off when the terminal will take the initiative to send alarm
10, GPRS communication mode terminal, after each connection, automatically enter the GPS positioning mode, using TCP/IP and UDP protocol,
11, remote configuration of the relevant logistics lock information.
12, location information, switch status, electronic lock, instant information, etc..
13, monitoring center remote authority unlock, IC card unlock mode, handheld unlock mode, SMS unlock mode, etc.
14, monitoring center according to the pre-set location, range, vehicle overtime, route to regulate the logistics of walking routes, such as violations, real-time reporting, monitoring and so on.
Product appearance / technical parameter：
- Product parameters：
|
Hardware features |
备注 |
|
|
Hardware architecture |
Use STM32 | |
|
Communication module |
GPRS、WCDMA | |
|
Technical specifications |
||
|
Operating Voltage |
3.6 V/DC | |
|
Average operating current |
170 | |
|
RFID |
S70 | |
|
spare battery |
15000mAh | |
|
Dimensions |
335(with beam)mm*102mm*35mm | |
|
Host weight |
1 KG | |
|
Environmental characteristics |
||
|
Automotive EDM Interference Immunity |
Discharge voltage of 1kV ~ 2kV, discharge frequency of 20 times / s ~ 200 times / s |
Fast Transient Burst Impedance
4KV, experimental grade IV
Electrostatic discharge immunity
Contact discharge 6KV, air discharge 8KV, experimental grade Ⅲ
Conducted harassment limits
Meet the requirements of Class B
Radiation disturbance limits
Meet the requirements of Class B
Temperature characteristics
Operating temperature -40 ℃ ~ +75 ℃
humidity
5% to 95% non-condensing
GPS performance
Sensitivity
－159dBm
Positioning time
Cold start less than 34 seconds; hot start less than 3.5 seconds; warm start less than 33 seconds, re-capture time 1.0 seconds
positioning accuracy
10m
Speed accuracy
0.1m/s
GSM / GPRS performance
frequency
850/ 900/ 1800/ 1900 MHz
Transmit power
Class 4 (2W @ 850/ 900 MHz)
Class 1(1W @ 1800/1900MHz)
Operating temperature
-40 °C to +85 °C
data storage
Blind sector cache
Cache 2000 (point) location information
2.Host LED status description：
1.Green LED — Indicates GPS signal status
| State | Definition |
| Flash (flash once every 1 second) | Searching for GPS signals. |
| Slow flash (every 5 seconds flash) | Has been targeted |
2.Red LED — indicates GSM status
| State | State |
| Flash (flash once every 1 second) | Flash (flash once every 1 second) |
| Slow flash (every 3 seconds flash) | Slow flash (every 3 seconds flash) |
| Frenzy (0.2 seconds flash 2S) | Frenzy (0.2 seconds flash 2S) |
3.Blue LED — indicates the charge status
| State | Definition |
| not bright | No charge or full charge |
| Always bright | The main power has been connected |
4.Orange LED — undervoltage indication status
| State | Definition |
| not bright | Power is normal but no power |
| Always bright | The machine is currently in an undervoltage condition |
