Good Wholesale Vendors Line In Track - auto gps tracker Long Connection GPS Tracker MT008G – Dragon Bridge

GPS vehicle communication terminal

（GPS+GSM+SMS/GPRS）

V1.2.1017

Model：G-MT008G

MT008G is a special version of MT008. MT008 is a GPS tracker that easily installs to a car’s power source. Perfect for tracking fleet vehicles, this best-in-class GPS device features improved accuracy, and it’s designed specifically to make locating and routing vehicles as simple as possible. It has built-in vibration sensor for intelligent vehicle anti-theft.

 1. Product accessories map：

Power cord                                                     Relay（optional）

Microphone（optional）                           SOS Alarm button(optional)

Fixed magic stick

2. Product function：

1. Adopt UBXLO-7020 GPS module and 3G (HSDPA/WCDMA) communication module.
2. GPS+GSM base station dual mode location
3. Data communication: SMS/GPRS/HSDPA R5/WCDMA R99/EDGE/CSD (TCP/UDP)
4. Real-time query location
5. Chinese address query
6. Timed tracking
7. Pitch tracking
8. Mobile phone positioning
9. Built-in large capacity standby battery
10. Electronic fence
11. GPS blind area alarm
12. An electric alarm
13. Speeding alarm
14. Mileage report
15. Pronunciation monitoring (selection)
16. SOS emergency alarm (selection)
17. Remotely cutting off car oil / electricity (selection)

Specification parameter 

7.Log on to the global positioning service platform

Service platform landing site: www.dbgps.com

If you already have login account information on the platform, you can login directly to the background server. Otherwise, please contact your dealer to open an online account for you. The login account and the login password are provided.

Enter the user login platform, fill in the login account and password, and submit it to the service platform.

If you already have login account information on the platform, you can login directly to the background server. Otherwise, please contact your dealer to open an online account for you. The login account and the login password are provided.

Enter the user login platform, fill in the login account and password, and submit it to the service platform.

Operation instructions for service platform, please obtain “service platform operation guide” for your dealer.

8.Troubleshooting

1, the terminal has been unable to connect to the background server after the first installation, and the background display is not on-line.

Please check the terminal installation:

1) the main power supply wiring is correct, attention should not be connected to the internal control line of the car.

2) whether SIM is installed correctly, please refer to the installation instructions.

3) if the ACC ignition line is connected, then insert the vehicle key and open the ACC.

4) check the status of the LED indicator. Normally, the red power status indicator lights up for 0.1 seconds to extinguish 2 seconds. The Yellow GPS status indicator is long and the blue GSM status indicator is long and bright.

5) check if GPS has been positioned. If it is not located, go to the open space for the first time

Location.

2, the terminal displays the off-line state in the background.

First, observe whether the 3 indicators of the device are normal. Without the condition observation, you can check the status of the card first. The steps are as follows:

1) dial the SlM card number of the device to see if you can hear the call.

2) whether the vehicle has not covered the GSM network signal in the basement.

3) observe the dropped area, whether the individual dropped or all dropped, so as to determine whether it is the operator’s network problem.

4) whether the SIM card is in arrears.

5) whether the GPRS service has been canceled (the last day of the end of the month is offline).

6) query parameter settings. See if the device serial number and GPRS transmission interval are correct.

3, if the terminal GPS function has been activated, but it has not been positioned for a long time, please check whether the installation location of the terminal meets the requirements:

1) when the terminal is installed, the GPS antenna should face to the sky.

2) the terminal installation position must be the place where the material (such as metal) is shielded without electromagnetic wave absorption. In particular, attention should be paid to the vehicle glass at the top of the terminal not attached to the explosion-proof heat insulation film (the high metal components in the film composition will absorb the high frequency electromagnetic wave), otherwise the GPS signal will receive a large attenuation and lead to the positioning accuracy. When it comes down, it can even make it difficult to locate the terminal.

4, when the GPS signal reception environment is poor (surrounded by tall buildings blocking the GPS signal), please drive to the open space to locate the sky. It takes 1-2 minutes for the first time to locate the time.

5, when the GSM signal receives an exception, please check that the terminal’s SIM card is properly installed, or where the GSM signal may not be covered (such as in the basement), please drive to a place where the GSM signal is covered.

6, when the center number cell phone receives a blackout warning message, determine whether to cut the line illegally. Otherwise, please check the fuse of the power line. If the fuse is broken, please contact your dealer to replace the same type of FUSE, and check out the internal fault after the termination of the terminal.