Factory Outlets Location Gps Tracking Device Car - reliable gps tracker Long Standby GPS Tracker LTS-V3S – Dragon Bridge

LTS-V3S

（The three years long standby）

Statement

The manual may have technical incorrect parts or printing mistakes. The content of the manual can be updated at irregular time without prior notice, and the updated content can be included in a new version of the manual. Our company will improve or update the product or program described in the manual at any time. If the product does not agree with the manual, please in kind prevail. Our company has the power of final interpretation of the manual. 

Chapter II Main Characteristics of Product

1.The product does not have any connecting line and is convenient to mount.
2.The product is provided with a large-capacity disposable super lithium battery which is super-low in self-discharge rate and ultrahigh in temperature adaptability. An ordinary lithium battery can only work at 0℃ to 50℃.
3.The product can work for a long time, under the setup that one piece of data is transmitted every 24 hours, the service life can be longer than 1000 days theoretically, and the battery does not need to be replaced frequently.
4.The power consumption can be reduced, and the working current can be reduced to be less than 0.03mA when the product is in a dormant state, thus ensuring that the product can work for a long time.
5.The product is smallest in size when being compared with product of same properties and specifications, thus being convenient to hid and mount.
6.A strong-magnetic version (LTS-V3SC) is built into the product, five neodymium iron boron super permanent magnets are embedded into the bottom of the product, and the product can be solidly adhered to a metal surface, thus being convenient to and private to mount.
7.A strong-magnetic version (LTS-V3SC) is built into the product, and thus a detaching alarm function is achieved.
8.The product has a plurality of positioning modes, including GPS, AGPS and base station positioning.
 
 Chapter III Technical Parameters

3.1【Overall machine parameters】

3.2 【Communication module parameters】

3.3【GPS positioning module】

Chapter IV Terminal Function Description

4.1 【Basic functions】

4.1.1 Positioning monitoring

When being delivered, the terminal defaults that one piece of position information is submitted every 24 hours, the position information includes the positioning state, the longitude and latitude, the GSM signal intensity, the GPS satellite number, the battery voltage, etc., and the positioning information time interval can be set.

4.1.2 AGPS

The terminal has an AGPS function, after the terminal is connected with the GPRS, the AGPS function is available, the positioning speed of the GPS module is accelerated, and the positioning accuracy is improved.

4.1.3 Base station positioning

The terminal defaults that GPS positioning is used, and when GPS enters a blind area and accurate positioning is unavailable, the terminal automatically switches to base station positioning. Very precise reference positioning location can be provided through base station positioning.

4.1.4 Battery low voltage alarm

The terminal can detect the voltage of the built-in battery at real time and can upload the voltage to a sensor at real time; when the voltage of the battery is lower than 3V, the terminal can make a battery low voltage alarm. At the moment, the uptime of the battery is already short, and the built-in battery needs to be replaced as soon as possible.

4.1.5 Intelligent tracking function

When a vehicle is stolen or other emergency situation happens and the real-time position of the vehicle needs to be tracked, a short message instruction can be transmitted or a platform is set to transmit an instruction, the terminal can enters into the tracking state when operating next time and receiving the instruction, the position data can be constantly transmitted at time intervals set by a user till an instruction of stopping tracking is transmitted by the user.

4.2 【LTS-V3S expansion function】

4.2.1 High-magnetic function

Five circular neodymium iron boron permanent magnets are built into LTS-V3SC, the equipment can be solidly adhered to the metal surface, thus being convenient and private to mount.

4.2.2 Detaching alarm function

A detaching alarm button is arranged at the bottom of LTS-V3SC, and when the equipment is detached, the detaching alarm button can be immediately activated to enter into the working state to report the present position information.

Chapter V Installation Instructions

5.1 【Product installation figures】

 Fig. 5.2 【Installation and debugging procedures】 

5.2.1 SIM card installation

Open the top cover of the terminal, insert SIM card into the SIM card holder, and subsequently make sure that the SIM card is inserted in place. Please make sure that the GPRS function of the SIM card is available in advance, and the SIM card number is obtained.

5.2.2 Main machine power on

After the SIM card is installed, the battery switch is shifted to ON, then the red light starts flashing, which means the main machine is powered on to work.

5.2.3 Parameter setup

1. IP port setup

E.g., if the server IP of a user is: 119.145.40.6 and the port number is: 8881, write: *88*1119145040064*8881# through LCD or mobile phone, the terminal replies: success, then the setup is accomplished.

2. TCP/UDP connection mode setup

e.g., if the server IP of the user is: 119.145.40.64, the port number is: 8881, and a TCP connection mode is adopted, write *88*1119145040064*8881*1# through the LCD or the mobile phone, if a UDP connection mode is adopted, write *88*1119145040064*8881*1# through the LCD or the mobile phone, the terminal replies: success, then the setup is accomplished.

5.3【Key parameter setup】

5.3.1 Awakening time setup

Instruction format: HX,T#

Instruction specifications: T: awakening time, unit: minute, default T: 1440; e.g., HX,1440#, the awakening time is set to be 1440 minutes (24 hours).

Notice: generally, the awakening time defaults to be 1440 without setup, and if a shorter awakening time is set up, the working time can be greatly shortened.

5.3.2 Tracking mode

Instruction format: ZZ,<A>[,T1,T2]#

Instruction: specifications:  tracking mode

A: if A=1, entering into the tracking mode; if A=0, quitting from the tracking mode;

T1: the time interval entering into the tracking mode, unit: second;

T2: the lasting time after entering the tracking mode, unit: minute;

ZZ,1,10,60#    entering into the tracking mode, the feedback time interval is10 seconds, and hibernate after 60 minutes;

ZZ,0#      quitting from the tracking mode;

5.3.3 closing positioning

Instruction format: LBS,A#

Instruction specification

A=2 closing the positioning function; A=1 pure base station positioning mode; A=0 base station positioning, GPS positioning, AGPS; A=0 as default

e.g. LBS,1# entering the pure base station positioning mode, and closing GPS module;

5.3.4 the next time awaking time

Instruction specification: T the next time awaking time, unit: minute, the instruction is used for correcting the awaking time;

e.g. HXC,120#; awaking after hibernating for 120 minutes the next time.

Notice: after the equipment enters into the tracking mode, please do quit from the tracking mode after the task is accomplished, or else the power of the battery can be used up within a short time as data are uploaded frequently.