Factory directly Buy Gps Tracker For Car - vehicle tracker online Long Connection GPS Tracker mt004 – Dragon Bridge

GPS Vehicle Tracker

(GPS+GSM+SMS/GPRS)

G-MT004

Introduction：

MT004 is a covert GPS tracker that easily installs to a car’s power source. this powerful hidden car tracker puts you in total control of individual vehicles or fleets – and drivers will never know it’s there unless you tell them. Perfect for tracking fleet vehicles, this best-in-class GPS device features improved accuracy, and it’s designed specifically to make locating and routing vehicles as simple as possible. It has built-in vibration sensor for intelligent vehicle anti-theft。

Functions

Voltage: 12-60V DC

GPS location, GPRS timing report

Inquires the position by SMS or mobilephone or PC

Built-in vibration sensor, vehicle anti-theft（Optional）

ACC ignition signal detection, vehicle state hint（Optional）

Can remote control vehicle cut-off oil or electric（Optional）

One SOS key（Optional）

Remote monitorin；（Optional）

Power cut-off alarm（Optional）

Specification：

Relay connection comands

Oil pump cut-off relay connection method：Coil ends connection were white line (85) and the yellow line (86), white line (85) joint car positive (+ 12 v), the yellow line (86) joint device relay control line.

The vehicles on the tubing string attached to oil pump, cut the wire of oil pump positive, the wire of oil pump positive joint the normally closed end of the relay (green line 87 a), the other end joint the relay’s other end (green line 30).

Note: this product with standard for 12V relay. Fit for installation on 12V car battery vehicles.

If the battery of the vehicle is 24Vs battery, need to be choose 24V relay.

Power on/off

Power on: Before power on, please insert the effective SlM card, and connect all the wiring. The device will auto power on when the outside power input. If no outside power input, long press key for over 5 seconds, the device will power on, then you will see LEDs flickering.

Power off: When the device power on, long press key for over 5 seconds, the device will power off, then you will see LEDs no light. If outside power inputs also exist, the device will auto restart again.

LED scintillation state meaning interpretation：

Application： Widely used in vehicles, it is your tracking and monitoring assistant. You can view the track and know where the vehicle is located.