Excellent quality Yml Cargo Tracking - dash cam adas Fatigue driving camera DB-A501 – Dragon Bridge

DB-A501

Driver State Monitor System

I. Product Synopsis

DB-A501 is a bran-new Driver ADAS Safety Monitor System based on the fifth generation of fatigue model’s algorithm, which gives a warning of fatigue drive and kinds of dangerous driving behaviors by means of image recognition and driver’s mental state analysis to decrease accidents caused by fatigue drive. Furthermore, DB-A501 is also capable of sending abnormal data and videos via 4G network to an end-user platform management center to avoid occurrence of accidents by immediately taking effective measures.

1. Value of Fatigue Warning

Fatigue has long been an inevitable problem that is controlled to an extent for drivers, for example, when driving two hours at a speed of 100km/h, the driver has to struggle to stay awake on account of his lower levels physiological functions followed by inattention. In general, accident rates are extremely high when the driver drives more than 6 hours a day or is lack of proper rest, for example, only having a rest of less than four or five hours last night. In addition, with the popularity of smart phones, more and more drivers are used to playing his cellphone while driving, it also will cause a popularity of accidents.

A set of terrible statistics has already been reported, indicating that 72% of all accidents occur due to drivers themselves and 25~30% thereof are caused by fatigue drive; that 40% of all serious and fatal accidents are fatigue related; that 70% of all drivers will fall asleep at the wheel on the highway and specially happens to those who likes playing their cellphones while driving.

Therefore, it is a great value to eliminate fatigue at driving for sake of the drivers, families, companies, as well as the society.

2. Host introduction

Power supply and signal line interface

It works when power connectors are connected to corresponding power interfaces on the DB-A501 device; the signal line includes video cable, communication line, etc.

SD card slot

SIM card slot

GPS&4G antenna terminal

Bracket

Figure 1. Schematic Diagram of Appearance of DB-A501 Active Defense System

3. Product specifications

Table 1

instruction Book Of DB-A501

4.Function Instruction

1) All Kinds of Warning

The default starting speed is 15km/h for all below kinds of warning (except for the speeding warning)

Table 2

1.In Test Model

After entering into the test model, the sensitivity will be fixed as 1s.

2.In Normal Model

DB-A501 can make a comprehensive judgment and adjust the sleepiness warning sensitivity automatically according to the vehicle speed, driving time period and the driver’s driving behaviors etc., and the adjustment is made at an interval of [1s, 3s]. 

3.Driver Characteristics and Posture Self-calibration

After DB-A501 is started and the vehicle speed exceeds 30km/h (which can be set), the system will enter a period of 45-second self-calibration (the calibration time is 10s in test mode). During this period, core parameters of the system will be calibrated according to individual characteristics and driving posture of the driver. Please keep a normal driving state in the process, please do not simulate fatigue and sleepiness. Furthermore, the device will not issue a looking around warning before the calibration is completed. After the calibration is completed, the device will send a reminder voice like “beep~beep” and the system can normally trigger a posture warning.

4.Analog Image Output

DB-A501 provides real-time analog image output in NTSC or PAL format. The signal can be used to calibrate the orientation of installation, and can also be connected with almost all the popular Car DVRs (Digital Video Record) on the market to store the videos about the driver’s driving. The standard output can be adjusted through a DIP switch 4#; the

PAL system is default; and by dialing down, you can switch to the NTSC system.

5.Video Storage

DB-A501 can store the driver’s real-time driving behaviors into a high-speed TF (higher than Class 10) card by 3 minutes as a unit and the default is standard definition; for example, a 8G card can store videos for about 3 days’ driving behaviors; its resolution can be configured as high definition storage (720P); and the SD card can support up to 256G.

6.4G communications

DB-A501 can transmit alarm information, alarm videos and other related data to the fatigue monitoring management platform via 4G communications for easy supervision and management.

7.Input/Output Interface

DB-A501 supports three-channel I/O signal inputs, including two-way switching signals and one-way PWM speed signal. Meanwhile, it also support two-way switching signal outputs, which can control some accessory devices like the vibration cushion or refreshing smell generator to trigger relevant actions when the sleepiness warning happens.

8.Communication Interface

RS232

DB-A501 has two-way RS232 output interfaces, one can be seamlessly integrated with Roadefend ADAS forward active safety device RDT-402, and the other can communicate with another terminal devices.

CAN

DB-A501 has an one-way CAN interface, which can receive the vehicle’s CAN signal.

9.Alarm Events Recording

DB-A501 can make a record for each alarm information, including the position, event, alarm type and the relevant file name of alarm video, etc.

10.Local Storage of Alarm Images

DB-A501 will create folders with year.month.day in an SD card and store the alarm images of the day sorted according to types of fatigue warming (sleepiness, calling, smoking, etc.) 

11.System Upgrade

The device is started by placing the upgrade package file in the TF card; and once you

hear a voice like “beep, beep, beep” and the device is restarted, it means the device

upgrade operation has been done.

Ⅱ.Applicable Vehicles

Passenger and cargo transport vehicles, dangerous goods transport vehicles, mining vehicles, taxis and school buses and other vehicles.

Ⅲ,Friendly Reminder

1.Will you drive when you are in fatigue?

Fatigue driving is different from drunk driving, and people always choose to or have to drive even though they feel tired because they claim they are alert to fatigue or they are in a hurry sometimes. Therefore, there is inevitably the following problems:

The first problem: people will still choose to drive even though they are tired because they have to do so;

The second problem: the drivers think that they can control the fatigue. When having a sense of fatigue, a driver may argue that he can eliminate it through conventional methods such as, having a cup of coffee and other refreshing drinks, smoking, turning music volume up, opening windows, scratching his head, twisting his neck.

However, we should accept the fact that fatigue cannot be eliminated by means of relying on subjective thoughts of the driver with the aid of applying the above-mentioned methods to avoid falling asleep. Those irritating behaviors, such as smoking, increasing the volume of the radio, drinking coffee, opening windows cannot actually prevent “drowsiness–induced substance” from influencing the brain, and conversely, they cause paralysis to the driver.

Do you know? Drinking excessive coffee can cause insomnia, headaches, allergies and anxiety.

Do you know? It takes more than 10 minutes for caffeine to get into your blood system to finally generate a stimulus, so a cup of coffee would not have such a quick play as required but you have already fallen asleep. Also, if you have become accustomed to effects of caffeine, stimulating effects will be weaker.

Do you know? Opening the window and increasing the volume of the radio can indeed increase your alertness in a short time, but it will not last long.

2.DB-A501 Benefits

DB-A501 employs the method of combining the image recognition with the driving behavior analysis to give a well-intentioned warning when you are tired and inattentive. Once serious