MT-009Z is a 4G full Netcom vehicle positioning terminal carefully built for the Internet of Vehicles. It integrates 4G full Netcom wireless communication technology and GPS/BDS satellite navigation and positioning technology. 3-axis sensor, intelligent power-saving wake-up work. It has functions such as DC detection, ACC detection, power failure alarm, overspeed alarm, mileage statistics, and remote fuel and power cutoff. With the global positioning service platform, the real-time acquisition, tracking and positioning functions of vehicle data are realized.
|
function name |
Yes |
No |
function name |
|||
|
Electrical Characteristics |
Power supply |
● |
Power supply |
|||
|
Operating voltage range |
● |
Operating voltage range |
||||
|
Working current |
● |
Working current |
||||
|
sleep current |
● |
sleep current |
||||
|
Built-in battery capacity |
● |
Built-in battery capacity |
||||
|
Environmental characteristics |
range of working temperature |
● |
range of working temperature |
|||
|
Storage temperature range |
● |
Storage temperature range |
||||
|
Operating humidity range |
● |
Operating humidity range |
||||
|
Communication |
Communication module brand/chip model |
● |
SIMCOM XM808 |
|||
|
Communication frequency band |
● |
LTE/4G |
Supported frequency bands |
LTE-FDD:B1/B3/B5/B8 |
||
|
LTE-TDD:B38/B39/B40/B41 |
||||||
|
SIM card |
● |
Micro SIM card |
||||
|
communication antenna |
● |
Built-in antenna |
||||
|
Antenna Specifications |
● |
FPC Antenna |
||||
|
GPS/BD positioning features |
Positioning module brand/chip model |
● |
SIMCOM MX808 |
|||
|
Targeting |
● |
Beidou+GPS |
||||
|
cold start time |
● |
Average 32 seconds |
||||
|
warm start time |
● |
average 1 second |
||||
|
tracking sensitivity |
● |
-162dBm |
||||
|
positioning antenna |
● |
Built-in ceramic dielectric antenna |
||||
|
Antenna Specifications |
● |
25mm*25mm*4mm |
||||
|
GPS band |
● |
L1: 1575.42±1.023MHz |
||||
|
Beidou frequency band |
● |
B1: 1561.098±2.046MHz |
||||
|
Number of satellite channels |
● |
64 |
||||
|
positioning accuracy |
● |
<10m (1σ) |
||||
|
Timing accuracy |
● |
<30ns (1σ) |
||||
|
Speed accuracy |
● |
<0.1m/s (1σ) |
||||
|
maximum acceleration |
● |
4g |
||||
|
Maximum speed |
● |
515m/s |
||||
|
maximum height |
● |
18000m |
||||
|
External interface |
cut off oil and electricity |
● |
One external relay can be connected |
|||
|
ACC detection input |
● |
ACC detection port all the way |
||||
|
Dimensions |
Host size (length, width and height) |
● |
83mm*33mm*13.5mm |
|||
|
shell material |
● |
ABS plastic |
||||
|
IP protection class |
● |
|||||
|
Host weight |
● |
35 gram |
||||
|
function |
Function breakdown |
description |
|
Location data report |
Location tracking |
The positioning information such as latitude and longitude is returned according to the set interval time. |
|
Vehicle status detection |
Ignition/extinguish state |
The ACC switch status is included in each uploaded packet. |
|
Vehicle power failure reminder |
Turn on the backup battery. When the host detects that the vehicle voltage is less than 5V, it will report the power failure reminder. |
|
|
Low pressure alarm |
When the host detects the vehicle voltage 5-10V, it reports a low-voltage alarm reminder. |
|
|
Over Speed alarm |
The platform sets the maximum speed limit value. When the GPS speed is greater than the set value, the over-speed alarm is reported. |
|
|
Oil line detection |
Support platform and SMS to cut off oil and gas, oil and gas function |
|
|
Illegal removal of the alarm |
When the terminal generates a power failure alarm or triggers the light status, if both conditions are generated within 2 minutes, the illegal removal alarm is reported. |
|
|
3D Collision alarm |
When the collision threshold alarm occurs, the x axis, y axis, z axis acceleration data of the acceleration sensor can be sent to the customer platform, as well as the speed of ten seconds before and after the collision, and other information. |
|
|
Other Functions |
Blind zone re-transmission function |
The terminal is located and not online, and the data is stored up to 300. Upload when the signal is online normally |
|
EPO assisted positioning function |
The terminal supports the EPO assisted positioning function to enhance the positioning effect. |
|
|
Inflection point |
When the device orientation angle changes more than a certain angle, immediately upload a position data to optimize the trajectory. |
|
|
Remote upgrade |
Upgrade the housekeeper remote upgrade. |
|
|
Low power consumption |
Sleep mode |
G-sensor senses the vibration state of the vehicle in real time, and the power is in the sport mode. When the host has no vibration for 5 minutes, it enters the static mode, and the GPS module is turned off, and the vibration enters the sport mode. |
Support power failure alarm, overspeed alarm and other multiple alarm functions;
It can be connected to an external oil-cutting relay/wireless oil-cutting accessory, which supports the function of cutting off the oil circuit/circuit of the monitored object, and realizes functions such as oil-cutting and power-cutting;
Support the function of electronic fence, users can delineate virtual electronic fence through the platform/APP, when the device enters or exits the fence, it can be recognized by the platform and an alarm will be issued;
When an alarm occurs, an alarm text message/phone can be sent to the monitoring number, and the alarm can be uploaded to the platform at the same time;
The terminal adopts industrial-grade high-stability GPRS module from well-known manufacturers, built-in 4G high-sensitivity antenna, supports TCP/IP data transmission, and supports domain name/IP address connection to the server;
Built-in large-capacity storage chip, which supports data storage in offline state and supplementary transmission of blind spot data; when the vehicle is in a place with weak wireless signal or serious interference, the vehicle will temporarily store the data of vehicle operation in FLASH, and when the wireless signal returns to normal After that, these data can be supplemented, so that the data is not missing. ;
Built-in 3-axis acceleration sensor, integrated with precise acceleration algorithm, real-time acquisition of vehicle status and other vehicle conditions;
High-sensitivity GPS/BDS dual-satellite positioning module, anti-jamming ceramic antenna, to achieve more stable satellite search signal, support AGPS fast positioning tracking, synchronous timing;
In sleep mode, it supports low battery voltage monitoring alarm, abnormal vibration alarm and other vehicle startup, flameout, and sleep automatic reporting messages;
Support online remote upgrade and remote configuration of product parameters.
Low-power energy-saving mode, which can accurately judge the ignition and flameout status of the car, and the intelligent sleep and wake-up mechanism can reduce the average power consumption of the entire system;
