2G/4G Obd2 oil and mileage GPS Tracker device G-M200

Property

description

agreement type

ISO-15765 500K ST

ISO-15765 500K EX

ISO-15765 250K ST

ISO-15765 250K EX

ISO-14230 FAST

ISO-14230 SLOW

ISO-9141-2

Communication Management Function

After the vehicle is turned off for a while, it goes to sleep and reduces power consumption

Network dropped calls can be automatically reconnected.

Data information and platform interaction using TCP protocol

The IP address, port number, and APN settings are directly made to the terminal through the platform, and password protection is provided.

GPS

Includes latitude and longitude, time, satellite number, speed, direction, ACC status, battery voltage, OBD speed.

Contains network base station LAC and CellID information, carrier code.

The terminal automatically judges the trajectory route, realizes the intelligent reporting of the GPS point, and realizes the trajectory butterfly shape effect.

The monitoring platform sets the manner and frequency parameters of the transmitting terminal to return the positioning information.

Reminder alarm function

The vehicle ignition reports the ignition alarm, including the alarm time and GPS information.

The vehicle is turned off and the fire alarm is reported, including the alarm time and GPS information.

The vehicle voltage is lower than the settable voltage threshold, and the low voltage alarm is reported, including the alarm time and GPS information.

The vehicle idling time exceeds the settable time threshold, and the idling time is too long, including the alarm time and GPS information.

For vehicles that support OBD water temperature data, the water temperature exceeds the settable temperature threshold, and the water temperature alarm is reported, including the alarm time, GPS information, and the current water temperature value.

The vehicle travel speed exceeds the settable speed threshold, and the over speed alarm is reported, including the alarm time and GPS information.

During the running of the vehicle, the acceleration is greater than the settable threshold. After the front and rear speed filtering, it is defined as a serious collision scene, and the collision alarm is reported, including the collision time, GPS information, and collision acceleration.

The vehicle is towed and reported to the trailer for warning, including trailer time and GPS information.

The vehicle travels for too long and automatically recognizes the fatigue driving reminder.

The terminal device is inserted and the alarm is reported.

The terminal device is pulled out, and the alarm is reported and pulled out (when the backup power is available).

In the case of vehicle ignition, the positioning time exceeds the set time threshold, and the alarm time is too long, including the alarm time and GPS information.

Driving behavior

Including driving cycle start terminal time, driving cycle total mileage, average speed, maximum speed, overspeed duration, overspeed times, idle duration, rapid acceleration, rapid deceleration, sharp turn information.

During the running of the vehicle, sudden acceleration, sudden deceleration, and sharp turn events are generated, and the incident is reported separately.

OBD data function

The vehicle's critical data stream is typically reported every 30 seconds.

The number of specific data items varies slightly depending on the vehicle data support.

The terminal identifies the vehicle fault information, and reports the platform when the vehicle fault state changes.

Clear the vehicle fault by issuing instructions from the platform.

Remote control management function

The terminal software can be remotely upgraded through the mobile network and upgraded through the FTP server.

The device is restarted by sending a command in the data channel mode.

The platform remotely queries terminal information, vehicle type, GPRS communication parameters, heartbeat parameters, GPS/CAN return parameters, SIM card information, GPS information, CAN data stream, and current faults through the mobile network.

Various alarm parameters, rapid acceleration and rapid deceleration sharp turn parameters.

The platform remotely sets terminal information, vehicle type, GPRS communication parameters, heartbeat parameters, GPS/CAN return parameters, clear vehicle faults, control restart, factory reset, clear blind zone data, various alarm parameters, and rapid acceleration and deceleration through the mobile network. Sharp turn parameters.

The version information is reported every time ACC ON.

The platform checks the car version information by instruction.

Each time ACC ON reports information such as the IMEI number of the SIM card.

The platform checks information such as the IMEI number of the SIM card through instructions.

Terminal status self-test: Check whether each function module (positioning module, bus module, FLASH, 3D module) works normally and alarms occur when a fault occurs (not related to wireless communication)

Battery voltage

Intake manifold pressure

Accelerator pedal position

Total mileage category

Fault light status

Engine running time

total mileage

Number of fault codes

Fault mileage

Total fuel consumption

Coolant temperature

Remaining oil

Engine speed

Vehicle ambient temperature

Engine load

Vehicle speed

Fuel pressure

Long-term fuel correction (group 1)

Air flow

Atmospheric pressure

Ignition advance angle

Intake air temperature

Throttle position

Total vehicle running time

 Country

Frequency band

Australia

Brazil

South Africa

Indonesia

Thailand

India

The United States/Canada