1. Introduction:
Intelligent logistics lock is a set of RFID, GPS/, Beidou RF technology and intelligent electronic lock as a whole, with satellite positioning technology, wireless transmission technology, BSL positioning, design a highly integrated intelligent electronic lock. Intelligent lock has only designated locations, designated ID can unlock, illegal unlock, alarm and can be achieved, and can achieve remote lock function
The lock is mainly used for intelligent logistics logistics, can further strengthen the logistics monitoring system, especially strengthen the car (including the box type trucks, container transport) in transit transit supervision, the use of high technology content of intelligent electronic lock. Instead of simple sealing, combined with bayonet equipment, tally report, release information, surveillance and monitoring equipment, the implementation of the whole process of transportation (in transit), state monitoring, supervision of the door. Intelligent logistics system, and through the lock GPS gateway system linkage, read the collected lock information in the monitoring system, can be found, security, timely reporting and prevention during the transportation of the goods stolen, steal unloading situation, with the management personnel, to play the role of logistics safety supervision.
2.Main functional characteristics of the product:
1 ,built-in GPS module or Beidou module,
2, support 2G or 3G (WCDMA) network
3, the use of RFID electronic tag, support RFID card unlock function
4, the use of high strength plastic mold, lock body is not easy to destroy, passive failure will provide an alarm signal, can be anti fall, shock, waterproof, dust-proof.
5, high capacity battery, up to 15000MHA, can be connected to work for up to 7 days
6, built-in strong magnetic, can make the lock firmly adsorbed on the car body
7, with low power alarm function, when the electricity is less than a certain value, the indicator light will start
8, with buzzer prompt function, when the lock is not normally locked, the terminal will automatically issue beep alarm to remind the driver
9, terminal with alarm reminders, when sewing is illegally cut off when the terminal will take the initiative to send alarm
10, GPRS communication mode terminal, after each connection, automatically enter the GPS positioning mode, using TCP/IP and UDP protocol,
11, remote configuration of the relevant logistics lock information.
12, location information, switch status, electronic lock, instant information, etc..
13, monitoring center remote authority unlock, IC card unlock mode, handheld unlock mode, SMS unlock mode, etc.
14, monitoring center according to the pre-set location, range, vehicle overtime, route to regulate the logistics of walking routes, such as violations, real-time reporting, monitoring and so on.
3. Product appearance / technical parameter:
- Product parameters:
Hardware features |
|
Hardware architecture |
Use STM32 |
Communication module |
GPRS、WCDMA |
Technical specifications |
|
Operating Voltage |
3.6 V/DC |
Average operating current |
170 |
RFID |
S70 |
spare battery |
15000mAh continue working 7 days |
Dimensions |
335(with beam)mm*102mm*35mm |
Host weight |
1 KG |
Environmental characteristics |
|
Automotive EDM Interference Immunity |
Discharge voltage of 1kV ~ 2kV, discharge frequency of 20 times / s ~ 200 times / s |
Fast Transient Burst Impedance |
4KV, experimental grade IV |
Electrostatic discharge immunity |
Contact discharge 6KV, air discharge 8KV, experimental grade Ⅲ |
Conducted harassment limits |
Meet the requirements of Class B |
Radiation disturbance limits |
Meet the requirements of Class B |
Temperature characteristics |
Operating temperature -40 ℃ ~ +75 ℃ |
humidity |
5% to 95% non-condensing |
GPS performance |
|
Sensitivity |
-159dBm |
Positioning time |
Cold start less than 34 seconds; hot start less than 3.5 seconds; warm start less than 33 seconds, re-capture time 1.0 seconds |
positioning accuracy |
10m |
Speed accuracy |
0.1m/s |
GSM / GPRS performance |
|
frequency |
850/ 900/ 1800/ 1900 MHz |
Transmit power |
Class 4 (2W @ 850/ 900 MHz)Class 1(1W @ 1800/1900MHz) |
Operating temperature |
-40 °C to +85 °C |
data storage |
|
Blind sector cache |
Cache 2000 (point) location information |
2.Host LED status description:
1.Green LED — Indicates GPS signal status
State | Definition |
Flash (flash once every 1 second) | Searching for GPS signals. |
Slow flash (every 5 seconds flash) | Has been targeted |
2.Red LED — indicates GSM status
State | State |
Flash (flash once every 1 second) | Flash (flash once every 1 second) |
Slow flash (every 3 seconds flash) | Slow flash (every 3 seconds flash) |
Frenzy (0.2 seconds flash 2S) | Frenzy (0.2 seconds flash 2S) |
3.Blue LED — indicates the charge status
State | Definition |
not bright | No charge or full charge |
Always bright | The main power has been connected |
4.Orange LED — undervoltage indication status
State | Definition |
not bright | Power is normal but no power |
Always bright | The machine is currently in an undervoltage condition |
4.Main pieces and accessories:
1. the logistics lock a host
2. a charger
3. a chain line
4. warranty card
5. certificate
5.Specific use steps
1. Select SIM card:
You can use mobile or Unicom’s 2G SIM card, or Unicom 3G card
Supports SMS / GPRS function and has sufficient balance.
2. Remove the four screws from the rear cover, open the rear cover of the device, insert the SIM card into the SIM card slot and lock it.