2017 China New Design Cctl Vessel Position - automobile tracking devices Long Connection GPS Tracker mt008 – Dragon Bridge

 G-MT008 GPS Vehicle Tracker

(GPS+GSM+SMS/GPRS)

（Version 1.0）

Accessories:

Power line                                         Relay

MT008 is a GPS tracker that easily installs to a car’s power source. Perfect for tracking fleet vehicles, this best-in-class GPS device features improved accuracy, and it’s designed specifically to make locating and routing vehicles as simple as possible. It has built-in vibration sensor for intelligent vehicle anti-theft. 

1. Functions

l GSM 850/900/1800/1900MHz

l Voltage: 9-50V DC

l GPS location, GPRS timing report

l Inquires the position by SMS or mobilephone or PC

l Built-in vibration sensor, vehicle anti-theft

l ACC ignition signal detection, vehicle state hint

l Can remote control vehicle cut-off oil or electric

l One SOS key

l Remote monitorin；

l Power cut-off alarm

2. Specification

GSM: 850/900/1800/1900MHz

GPRS: Class 12, TCP/IP

Voltage: 9-50V DC 

Current:≈22mA（12vDC）

≈12mA（24vDC）

GPS fixed time:  Cold start 30sec(open sky)

Warm start 29sec(open sky)

Hot start 5sec (open sky)

GPS fixed precision: 10m (2D RM)

Temperature: -20℃ ~ +70℃

Humidity: 5% ~ 95% RH

Dimension: 90.0(L)x45.0(W) x13.5(H)mm

Weight: 80g

3. Installation comands

3.1 Prepare

3.1.1 SIM Card:  Please use a GSM SIM card.

3.1.2 Before insert the SIM card, please make sure to turn off the device.

3.1.3 Please make sure the GPRS can be used, if not, please connect Service Provider.

3.1.4 Please make sure the Caller ID can be used.

3.1.5 Then insert the SIM card.

4．Power on/off

Power on: Before power on, please insert the effective SlM card, and connect all the wiring. The device will auto power on when the outside power input. If no outside power input, long press key for over 5 seconds, the device will power on, then you will see LEDs flickering.

Power off: When the device power on, long press key for over 5 seconds, the device will power off, then you will see LEDs no light. If outside power inputs also exist, the device will auto restart again.

LED scintillation state meaning interpretation