100% Original Factory How To Put A Gps On A Vehicle - device tracker Long Connection GPS Tracker MT008G – Dragon Bridge

GPS vehicle communication terminal

（GPS+GSM+SMS/GPRS）

V1.2.1017

Model：G-MT008G

MT008G is a special version of MT008. MT008 is a GPS tracker that easily installs to a car’s power source. Perfect for tracking fleet vehicles, this best-in-class GPS device features improved accuracy, and it’s designed specifically to make locating and routing vehicles as simple as possible. It has built-in vibration sensor for intelligent vehicle anti-theft.

Guide for quick installation and use

Please read the installation guide carefully before use in order to get the correct way of installation and quick operation. If the appearance and color of the product are changed, please take the object as the object

1. Product accessories map：

2. Product function：

1. Adopt UBXLO-7020 GPS module and 3G (HSDPA/WCDMA) communication module.
2. GPS+GSM base station dual mode location
3. Data communication: SMS/GPRS/HSDPA R5/WCDMA R99/EDGE/CSD (TCP/UDP)
4. Real-time query location
5. Chinese address query
6. Timed tracking
7. Pitch tracking
8. Mobile phone positioning
9. Built-in large capacity standby battery
10. Electronic fence
11. GPS blind area alarm
12. An electric alarm
13. Speeding alarm
14. Mileage report
15. Pronunciation monitoring (selection)
16. SOS emergency alarm (selection)
17. Remotely cutting off car oil / electricity (selection)

Specification parameter

3.1.Setting GPRS transmission location data interval time

The terminal default GPRS transmission location data interval is 120S, that is, upload every

120 seconds to the background server.

Locate the data. To set the GPRS transport location data interval, you can edit the GPRS

timing setting instructions.

Upmove123456 120  reply to  Set OK  upload interval settings (default 120 seconds)

3.2. The interval setting of entering dormancy

Auto123456 reply Set OK automatic working mode (default) device without any alarm, no operation after 5 minutes, the device enters the dormancy state: GPS, GPRS. Telephone or SMS or shock will wake up equipment immediately.

The time interval from the working state to the dormancy state of the terminal is 5 minutes.

Instruction format: sleep,123456,10 reply OK, open sleep 10: for 10 minutes 0: means no sleep

3.3. language and time zone settings

Terminal provides Chinese and English two language display, different regions of time according to the time zone settings.

Instruction format: 109# reply OK handover in English

Zone123456 E08 reply OK modified time zone E08: East eight district.

3.4. Restart the terminal

When the terminal works GPRS link exception, such as: the terminal parameter is set correctly, but the terminal is not online, you can send SMS instructions to the terminal. In order to enable the terminal to perform remote restart, the terminal can resume normal operation.

Instruction format: CQ reply to system reset OK! Device restart

3.5. Restore the factory setting

When the terminal setup parameters are not properly set, you can send short message instructions to restore terminal parameters to the default setting value of the terminal, try to restore the terminal to normal work.

Restore the factory setting instruction: FORMAT

When the terminal receives the instruction, it will restore the setting parameters of the terminal to the default value.

4.Log on to the global positioning service platform

Service platform landing site: www.dbgps.com

  If you already have login account information on the platform, you can login directly to the background server. Otherwise, please contact your dealer to open an online account for you. The login account and the login password are provided.

Enter the user login platform, fill in the login account and password, and submit it to the service platform.